Take the 2-minute tour ×
Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. It's 100% free, no registration required.

If I take a yeast slurry from a batch of beer, wash it and store it in a sanitized container - how long can I leave this yeast slurry in the fridge before repitching? I'm thinking of leaving it in the order of months.

share|improve this question
1  
see the answers homebrew.stackexchange.com/questions/6620/yeast-dead-or-alive - it describes different ways of storing yeast and how long it will take. –  mdma Jun 6 '12 at 7:59

2 Answers 2

I have been reusing my yeast for several years now. I don't do it correctly, but it has worked out for me. I would like to share what I actually do, and you can balance that against all the really great information regarding the proper care and feeding of yeast.

The only limiting factor that I really care about is autolysis, as this will create formaldehyde flavor in the beer. For modern high quality yeasts you really don't have to worry about this for eight months. I use this as an outside guide, as I will not reuse any yeast over eight months. Generally I reuse my yeast within two to three months, as that is about my brewing frequency these days, and I can say that I have never had this problem.

There are only two more factors to consider, contamination and start-up. For contamination you just want to make sure that your storage vessel is sterile. I use a pint sized mason jar. For start-up you want to get enough yeast at the right time in their life cycle. I never use a starter.

When I transfer from the primary to the secondary I harvest. I try to leave just a little beer on top of the yeast cake then swirl gently. If I do it right when I put the jar in the fridge about half will be visible yeast and half will clarify. I try to get it before fermentation has completely stopped but has almost stopped. This leaves a little sugar in the beer. The cold in the fridge crashes the yeast.

On the day of brewing I pull out the yeast before I start warming water and open it, then reseal it and shake and I allow this to slowly come up to room temperature while I brew.

After I cool down the wart I will transfer it to 5 gallon buckets. I will pitch the yeast in one of these buckets before siphoning into my fermenter.

I generally make about 10 gallons.

Well, I don't say that I do this "right" but I have never had a problem, and I have done at least 20 batches this way.

Hope this helps!

share|improve this answer
    
I have a somewhat similar process, except I've never waited as long as 8 months. I'm glad to know I could though! –  bk0 Jun 8 '12 at 17:56

The short answer is that you can leave it for 2-4 weeks in the fridge and pitch directly. Longer than that, and it's best to make a starter from a small amount of the slurry to avoid a sluggish start and yeast bite from many dead yeast cells.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.