Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

Do normal corks and normal corkers work with them? Is there a greater risk of breaking the neck of the bottle during corking?

share|improve this question
up vote 6 down vote accepted

The neck on the screw cap bottles is exposed to much less stress than a cork bottle, so they are made thinner, and consequently cheaper.

Can and should you do it? This post on HBT sums it up nicely:

There are a couple of trains of thought with this.

  1. physically, in most cases, it can be done
  2. it doesn't have the greatest presentation, if that's not an issue for you, then ok
  3. the glass at the threads is more prone to breakage, be careful
  4. getting the cork out can sometimes be a problem because you don't have the thick glass to pry against.

Only you can decide if it's worth the expense or effort to get cork wine bottles.

There are several other posts on the same page claiming it can be done, but ideally only as a last resort.

share|improve this answer

we just corked a screw top wine bottle with no problem what so ever. we also uncorked the bottle with no issues at all. We will definitely be corking larger amounts of screw tops in the future! Thanks to everyone for the great advice on this topic as well, happy winemaking!

share|improve this answer

I cork screw-top bottles all the time (I've been making wine for 4 years now) and have yet to have an issue with them. I use slightly narrower #8 corks for these bottles.

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.