Take the 2-minute tour ×
Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. It's 100% free, no registration required.

I'm trying to build a bunch of tap handles, and am a little confused on what I need.

Do I need both of these:

hangar bolt ferrule

Hangar Bolt and Ferrule

or just this:

enter image description here

Tap Handle Insert

Or something else / other things entirely?

share|improve this question
add comment

2 Answers

up vote 7 down vote accepted

Well...yes :)

If you want to have a ferrule on your handle like this:

enter image description here

then you need the hangar bolt and ferrule. The hangar bolt has 5/16"-18 male threads on the ferrule side, while the ferrule has 5/16"-18 female threads on the top, and 3/8"-16 female threads on the bottom.

If you want only wood at the bottom of your handle like this:

enter image description here

then you want the threaded insert (3/8"-16).

Protip: if you're planning on doing several, order your inserts in bags of 10 from a place like McMaster-Carr. It's a lot cheaper that way.

If you want to see how I make taphandles on my lathe, check out my videos here.

share|improve this answer
    
nice videos. I'm not very good with wood, but with the right tools and craftmanship you made it look easy. –  mdma Feb 14 '12 at 22:14
    
dang. great answer. how about these guys? mcmaster.com/#90016a031/=g909ta –  hookedonwinter Feb 14 '12 at 22:36
    
Thank to you both. @hooked, when I clicked that link it said 3 packs were ordered 04/18/11 underneath them, so I guess they're the right ones :) –  JoeFish Feb 15 '12 at 2:03
    
Also I edited the answer with thread sizes for the ferrule. –  JoeFish Feb 15 '12 at 2:10
    
@JoeFish I hope so! I never heard back and just assumed they'd work. Already have them in hand. Fast! –  hookedonwinter Feb 15 '12 at 20:34
show 3 more comments

Thanks for the great info. I found that Amazon carries packs of 10 threaded inserts cheaper than Mcmaster. http://www.amazon.com/Threaded-Insert-Threads-Tensile-Strength/dp/B0026GZU0Q/ref=lh_ni_t?ie=UTF8&psc=1&smid=ATVPDKIKX0DER

share|improve this answer
    
Hi, probably best for this to go into a comment rather than an answer. If you look under answers, you will see an "add comment" link. –  Jared Meyering Apr 1 '13 at 14:35
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.