Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

Rather than buying buckets or carboys, I would like to use 5 gallon PET water bottles that I can get free from work (I verified they are PET with the "1" on the bottom). However all my extract recipes are for 5 gallon batches, which would not leave any room for fermentation.

Is there any harm in reducing the volume to about 4 gallons for fermentation in these containers? I like higher gravity beers, for what it's worth, but I don't know if there's an upper limit. My next batch is going to be a Russian Imperial Stout (OG: 1.082).

share|improve this question
up vote 5 down vote accepted

Fermenting in a the free 5 gallon bottles you can get will work fine - after all that's pretty much what Better Bottle PET Carboys are. Compared to the 2-2.5 gallons of headspace you get in a bucket fermentor, the 1 gallon that you're leaving isn't much, especially for a high gravity beer like a RIS, so be sure to use a blowoff tube rather than an airlock.

It's probably best to also scale the recipe size down from 5 gallons to 4 gallons, unless you really like very big beers! (1.082 RIS 5 gallon recipe brewed at 4 gallons will come out at 1.102.)

blowoff tube

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.