Take the 2-minute tour ×
Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. It's 100% free, no registration required.

I'm looking to get some 1/2" NPT & barbed quick-disconnect fittings for my little brewery, making it easier to break down and clean, as well as give me some flexibility in what I'm sending where.

I was expecting to find the fittings in brass for under $5 in a bunch of places... I see garden hose quick disconnect fittings for that all over the place, but I was surprised and frustrated to find the cheapest ones for like $12 once I went away from the garden hoses. Granted, there's a smaller market, but that's a pretty big difference in price for what is ultimately the same thing.

I have approximately 12 points I'd like to put in quick-disconnects. I don't want to spend $200+.

Has anyone found alternatives to this, or perhaps some place where I can get these parts cheap?

share|improve this question
add comment

2 Answers 2

up vote 7 down vote accepted

Check out Brewer's Hardware or Bargin Fitting's selection of quick connects.

They've got stainless camlocks for about $6 each, which seem to be very popular among home brewers:

enter image description here enter image description here

Bargian Fittings also has chrome plated brass quick connects for $8 and $5:

enter image description here

Actually, if you don't mind aluminum, these camlocks are less than $3 each.

enter image description here

share|improve this answer
    
Hmmm... still considerably more expensive than the garden hose brass disconnects, but also a manageable expense. I'd seen the camlock ones advertized, but I'd assumed they would be much more expensive. –  Jeremy Holovacs Jan 25 '12 at 19:30
    
@JeremyHolovacs I just edited my answer with another link for you - a friend uses these aluminum camlocks, and they're dirt cheap. –  JoeFish Jan 25 '12 at 19:40
    
Your link does not seem to go where I would expect it to. –  Jeremy Holovacs Jan 25 '12 at 20:22
    
@JeremyHolovacs Whoooooops! I was showing someone else my home bar and pasted the wrong link :) That'll teach me to be lazy and not click my links before posting. It has been fixed. –  JoeFish Jan 25 '12 at 21:11
    
+1 camlocks are great –  mdma Jan 25 '12 at 23:50
show 1 more comment

For cheap disconnects, go with cam locks. Tri-clamp is easier to clean, but a bit more expensive. Garden hose disconnects are generally too low in quality to consider.

I only know about garden hose disconnect issues because, well, I water a garden daily. If I can't keep my garden hose from leaking, I wouldn't want to recommend them for beer.

Hopefully cam locks are within your budget. If not, I'd actually consider leaning more towards hose clamps than garden hose disconnects.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.