Take the 2-minute tour ×
Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. It's 100% free, no registration required.

Obviously, it can be done, as dry yeast works for fermenting beer. I go sometimes a month or two between batches, and carrying over one yeast culture across beers seems a bit of a pain. How is dried yeast made/ packaged? Is it something a homebrewer can reasonably do?

share|improve this question

4 Answers 4

up vote 3 down vote accepted

Simply put it is not practical for the homebrewer as you need to perform the drying under sterile conditions.

share|improve this answer
This seems to be the ultimate answer for my question. The other answers were good too. –  Jeremy Holovacs Jan 23 '12 at 16:39

I don't think the process of commercially drying yeast is straightforward - it involves a partial vacuum or a stream of filtered air to make the liquid suspending the yeast evaporate faster - and it's probably difficult to reach the levels of hygiene required in a homebrew setting.

If you want to preserve yeast for a long period, 1 year or more, you can store the yeast with glycerine and keep it in the freezer. There's a good writeup on HBT with the process and equipment needed. It's fairly simple and achieves good results. I've successfully brewed with yeast that I froze 3 years ago.

Even if you don't freeze the yeast, but keep the yeast in the fridge, the yeast remain in better condition in glycerine than when kept in wort.

If you are already making a starter then freezing is a simple process that allows you to keep a variety of strains in your yeast bank over a long period.

share|improve this answer

I know you can make a dry sourdough starter by just spreading it thinly on a sheet pan and leaving it in the sun to dry. That doesn't seem nearly sterile enough for our beery exploits, however.

You may want to look into yeast slanting and yeast washing. I also have an article on how I wash yeast on my website.

There was also an interesting thread recently on HBT about farming and freezing yeast using glycerine to protect the cell walls from rupturing.

share|improve this answer
"nearly sterile enough" is an interesting understatement. –  brewchez Jan 21 '12 at 13:43

Although I do not know the exact process, if sterility is the aim, it seems that all that is required is to create a positive air pressure sterile box(PAPSB). This can be done with lexan, a strong fan, and a few high grade HEPA filters. You can create a near sterile environment in this manner with the aid of a strong sanitizer and UV lights. Using this PAPSB you should be able to perform all of the necessary procedures outlined. Of course the box will need to be outfitted with gloves to allow manipulation of objects in the box. The system I am suggesting is similar to those used by CDC members when handling various bacteria and virii. A guide to creating such a box is here.

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.