Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

Looking for suggestions on brands of aquarium heaters to use in a fermentation chamber I've built.

My set-up is a 60 qt Igloo cooler with a custom foam insulation top cut to allow for a 5 to 6.5 gallon carboy. Fill it up with about 5-6 gallons of water. I have a Johnson Digital Temperature Controller with a thermowell. During the summer I'll use the temp controller to just monitor the temperature and use frozen water bottles floating in the water to help keep the carboy at the right temperature. But, since its the winter months now I want to use an aquarium heater to heat up the water to keep the temp consistent. I'm thinking I would only need a 50w heater and possibly a small aquarium water pump to help circulate the water.

Doe anyone have any suggestions of heaters that they have used successfully? Preferably one that they have hooked up to a digital temp controller

share|improve this question
Extensive research and talking to people who have used them, this seems to be one of the better ones, EHEIM Jager Aquarium Thermostat Heater 50W – HopHead73 Jan 12 '12 at 19:19
I used those heaters a lot for actual aquariums and they are great. They have their own thermostat and are fully submersible (they actually MUST be fully submersed) – stew Feb 12 '12 at 3:05

I use a bucket heater hooked up to a temperature controller. I also use a small aquarium pump to circulate the water when the heater is on. What I like about this is they are designed to brings buckets up to a boil, so they put out a lot of heat. This means that even if I wanted to do a larger water bath (i.e. several fermentors) or go higher for a saison it can handle it.

share|improve this answer
my variation on this was inspired by this: seattlefoodgeek.com/2010/02/…. I use the smaller elements referenced in the article. circulation is not need since they don't dump much heat. – mmccoo Mar 9 '12 at 5:56
I was less concerned about dumping a ton of heat, but more having an even distribution of heat. Of course once you get all the stuff for heating a water bath for brewing, you also have almost all you need to do sous vide (though sous vide typically uses more precise controllers than brewing). – Jeremy Kozdon Mar 9 '12 at 19:00

I purchased an adjustable temp submersible heater which I used to keep a cooler of water warm while I grew koji spores on rice for making sake. It worked quite well and being able to adjust the temp right on the heater made life easy. I think the lowest temp it can give is 72F though.

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.