Take the 2-minute tour ×
Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. It's 100% free, no registration required.

Are there any secret tricks to avoiding an exorbitant amount of soot on the brew kettle after the boil?

We have been making all grain batches recently using a 20 gallon stock pot and a propane burner, but we can never get the pot clean afterwards, so I'm finding black hand prints all over the house for weeks after brewing. The most recent batch we attempted to cover the bottom with aluminum foil; this was minimally successful.

share|improve this question
    
What kind of pot is it? If it's stainless steel, I found a can of powder for cleaning stainless steel and copper at a kitchen store. I suspect it's just very strong dishwasher soap (in powder form). I mix it with a bit of water into a paste, then let it sit for a few minutes before scrubbing it off. Cleans anything. Baking soda may also work for you. –  FrustratedWithFormsDesigner Sep 7 '11 at 4:37
    
What color is the flame on your burner? –  baka Sep 7 '11 at 12:17
    
My burner is literally caked with these weird spheres of soot, and my pot is blackened after every batch too. My flame is burning yellow, and adjusting the oxygen valve thingy on the burner doesn't seem to do anything. –  Graham Sep 7 '11 at 14:17
    
@Graham: yeah, that's no good. –  baka Sep 7 '11 at 15:41

5 Answers 5

Just before washing, I rub off excess soot on the grass,it comes off easily and then use a steelo pad, scourer and soapy water or whatever other method you choose to use. This saves your dishcloth and your bench getting dirty as we all know how hard it is to remove these marks.

share|improve this answer

Try buying a can of Barkeepers Friend. It's sold in most grocery stores, as well as Home Depot & Lowe's. It's a gritty, Comet style cleanser that doesn't scratch surfaces. Once I had soot build up from 3 different batches & Barkeepers friend took it off with one vigorous wash! I swear by it!

share|improve this answer

Like other answers have said, your burner's flame should be mostly light blue. The more yellow it is, the less efficient you are burning. Modify your mix to allow more oxygen and less fuel by either turning down the gas a touch, or opening the fuel-air mixing doo-hickey that most burners have.

If that STILL does not take care of the problem, get a bottle of dish soap. You want something that is as thick as possible. Squeeze some into your hand and rub on the sides/bottom of the pot. I've done this in cooking on a campfire, and it works like a charm. Just hose off the pot after you are finished and you are good to go!

share|improve this answer

As far as I've understood, propane soots excessively when burned with too little oxygen - does your burner have some method of adjusting inflow of air?

I'll also quote a random forum post:

I was a Scoutmaster for many many years and found Fells Naptha bar soap to be the best for coating pots before cooking and for cleaning them after, even if you did not coat them first. I liked to shred some with a grater, put it in a plastic bottle with some water, and then use it after it dissolved.

Perhaps you can try the same with some heavy duty soap next time, though I can't speak for its effectiveness.

share|improve this answer
    
+1 for the coating with soap. My scout troop doesn't use that particular soap, but the soap trick does help. –  fire.eagle Sep 7 '11 at 17:08
    
Standard dish soap is perfectly good for the soot thing. However, the burner is definitely a better fix. –  brewchez Sep 8 '11 at 0:24
    
Right, you should only really need the soap if you're cooking over a wood fire; propane should just be adjusted. –  Dale Sep 8 '11 at 23:23
    
Most hard soaps should do the trick. I was shown a trick by an old tech teacher - coat aluminium workpieces in soap when firing them, as the soap will blacken shortly before the metal reaches its melting point. Aluminium doesn't glow on heating, so that'll be the only warning you get. I'd presume that makes a coating of soap over aluminium cookware perfectly safe and easy to remove when finished. –  Tom W Sep 23 '11 at 12:54
    
I've done the "rub soap on before" trick as a scout and can confirm it works great. –  mpurkeypile Aug 1 at 22:24

The flame on your burner should be set such that it is almost totally blue, with just an occasional bit of yellow/orange. The soot is coming from having the gas/air mixture off-balance. If you see mostly yellow or orange flame, you are pretty much guaranteed to get soot on your kettle.

This will also severely affect your gas efficiency.

You may need to take your burner apart and clean the element with a scrub brush and some oven cleaner.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.