Take the 2-minute tour ×
Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. It's 100% free, no registration required.

Ladies and Gentlemen of Homebrewing, I was cruising my Google+ account, and I am stalking (I mean following/stalking) Wil Wheaton, and I noticed he is a homebrewer! Tonight he posted a question. I directed him here, however I doubt that he would read my post, so perhaps you all could head over to Wil Wheaton's Google+ Profile and help him out.

He asks:

I'm making an oatmeal stout for Jaime Paglia, and I'm trying to figure out the best time to put in the oats. This will be a partial mash, using extract for the base and some steeped specialty grains.

I can't find consensus on the usual forums. Some brewers say to put the oats (about 1 pound for a 5 gallon batch) in with the steeping grains. Others say you have to mash the grains with some 2 row, but don't say how much 2 row you should use, and how to scale back the extract if you go that way. I'm not afraid to do that kind of mashing (yay! experience!), but it's easier to use extract, so that's my preference at this point in my evolution as a brewer.

So I was thinking that I'd use the basic stout recipe I have, and I'd toast a pound of quick oats in the oven first, then steep them with the specialty grains when they were all toasty and golden and good.

I'm very interested to hear opinions on this, and I thank you all in advance for sharing whatever experience you've had.

You may also want to check out some of his other homebrew related posts.

share|improve this question
1  
Is that Whil Whheaton? –  Skava Sep 7 '11 at 0:56
1  
Good job pimpin the site though. –  brewchez Sep 7 '11 at 1:07
1  
I figured that would be one of the best ways to pimp it. Get it where an un-natural draw of people will go. I hope it brings a lot of folks here. –  Larian LeQuella Sep 7 '11 at 1:27
1  
Wil's post has done an excellent job of connecting homebrewers. Many good brews will come from his actions! –  Manfre Sep 7 '11 at 14:04
1  
The original question can be found here: plus.google.com/108176814619778619437/posts/JF75UnURMzs?hl=en –  Ray Sep 7 '11 at 17:52

3 Answers 3

up vote 8 down vote accepted

You may notice your malt extract say something like "non-diastatic, unhopped, pure malt extract", or something similar. Diastatic power is the ability of a malt to convert starch to sugar. In an extract, you don't need it because it's already been converted for you. However, to get starch to turn into fermentable sugar, a diastatic malt is required. The typical malt with the high diastatic power is 2-row.

Adjuncts (such as oat), on the other hand, do not have this power on their own. That said, they can piggy-back off of the enzymes in a diastatic malt such as two-row to perform the conversion and get fermentables. This is why you may have heard that you need to use 2-row along with the oats. A 1:1 ratio should suffice.

share|improve this answer
1  
Good answer. You on Google+? Let him know directly. :) –  Larian LeQuella Sep 7 '11 at 10:23
1  
@Denny--good point. Would you add your comment as an answer? –  Ray Sep 7 '11 at 17:08
    
Done, Ray. Hope it helps. –  Denny Conn Sep 7 '11 at 17:13
    
Don't steep oats, pretty straight forward. –  brewchez Sep 8 '11 at 0:31

I made an oatmeal porter which came out really, really nicely. The mouthfeel was smooth and silky but not overdone. The only downside was that it had next to zero head retention.

To get the "smooth" palate, you need to mash the oatmeal with your grains, but you really do not want to overdo the oats. I used 100g oats in a 15l batch (about 1/3 pound of oats in 5 gallons) which was easily enough.

I plan on repeating my recipe but need to work out how to retain that head.

Good luck on the stout.

share|improve this answer

If you don't mash the oats, you're simply adding starch to your wort. That starch can serve as food for bacteria and encourage an infection in your beer. Bottom line...don't steep oats. Mash them with a diastatic malt.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.