Take the 2-minute tour ×
Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. It's 100% free, no registration required.

I have a Hefeweizen (Wild Flower Wheat pg 135) in the fermenter that is ready to be racked to the secondary. The recipe calls for 5 days in the secondary, however the only secondary fermenters I have are plastic. I have read that plastic fermenters are a poor choice for secondaries because they are oxygen permeable. Should I worry about this? If not, could I simply use my bottling bucket for secondary fermentation, there by saving myself a step before bottling?

I have never used a secondary before, so I would like to try it for the experience. However, I don't want to skunk my beer either.

share|improve this question
1  
FYI, skunking is a light exposure issue not an oxygen exposure issue. So unless to rack to secondary in direct sunlight and leave the beer in direct sunlight afterwards...no skunking concerns should there be. –  brewchez Jul 27 '10 at 12:32

3 Answers 3

up vote 5 down vote accepted

Secondary for a Hefe seems silly to me. Leave it in primary for 5 more days is a better idea. Then rack right to bottling bucket for bottling day.

Actually 5 days in secondary for any beer is a waste of time really. Any benefit isn't worth the extra cleaning of equipment and risk of exposure to oxygen or airborne contaminants.

share|improve this answer
    
I upvoted this. I've never heard of doing secondary for only 5 days for any brew. What's the point? The only good reasons to use a secondary in the first place is for better clarity, dry hopping, bulk aging, or adding oak/fruit/etc. None of this is called for in a Hefe. –  markskar Jul 27 '10 at 14:32
    
I thought 5 days in the secondary was a bit on the short side. I will take your advice and bottle it this weekend. –  StormerOfLezbos Jul 28 '10 at 19:08

Don't worry about it at all. 5 days in a plastic bucket will be fine. I've left beer in a bottling bucket for much, much longer than that, and it's fine.

share|improve this answer
    
As a general rule, would you say using a bottling bucket for secondary fermentation is acceptable? –  StormerOfLezbos Jul 28 '10 at 19:09
    
I almost always use a bottling bucket for secondary. –  hookedonwinter Jul 28 '10 at 19:25

The problem with using a bottling bucket as a secondary is that when the remaining yeast and whatever else is floating around in your beer settles, it will get churned up when you open the spigot on your bottling bucket. It would be better to leave it in the primary than move it to the bottling bucket, because you are basically negating the whole purpose of using a secondary.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.