Take the 2-minute tour ×
Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. It's 100% free, no registration required.

I'm looking at getting a kegerator since bottling kinda sucks. I'm on Amazon and they have a fridge that can take:"1/2 barrels / Full Size Kegs (15.5gal), 1/4 barrels / Ponies (7.75gal)". I've only heard of corny kegs being used with homebrew. What's the difference between a corny and a pony keg?

share|improve this question
add comment

3 Answers

up vote 7 down vote accepted

I always thought standard quarter barrels were ponies. And according to Micromatic a Pony Keg IS a standard quarter barrel. The tall quarters are called "slim quarters".

Here is a link: Micromatic Chart

http://www.micromatic.com/images/articles/11/Kegs-new.jpg

share|improve this answer
add comment

Ponies, generally, are just tall, skinny quarter-barrels. They look like corny kegs, but have Sankey, or other commercial beer fittings. Sometimes the standard squat quarter barrel is also referred to as a "pony" keg. I think that designation is largely regional.

Cornelius kegs come from the commercial soft drink industry and are usually 5 gallons, although there are 2.5 gallon, 3 gallon and I have seen a 7 gallon Corny keg. Anything but the five is rare and I would have called the 7 a rumor if I hadn't seen one once. But only once.

share|improve this answer
add comment

I've never used sanke (the family of kegs pony's fall into) or corny kegs, so those of you who have correct me if I'm wrong, but I believe the reason that home brewers use corny's is because they are a lot easier to clean and sanitize compared to standard beer kegs.

share|improve this answer
    
There are a number of reasons homebrewers use Corny kegs. They may be easier to clean, but I don't think that's the primary reason. The main reason right now is that used Corny kegs are much more readily available. Corny kegs used to be the primary means of dispensing fountain soda, but most soda fountains now use bag-in-box soda syrup systems to dispense soda, so the corny kegs are being phased out in the soda market and are widely available for homebrewers to purchase used at great prices--$25 to $40ish. –  markskar Jun 11 '10 at 20:03
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.