Take the 2-minute tour ×
Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. It's 100% free, no registration required.

I've read that Brett will consume sugars that other yeast strains cannot. Is this true? I couldn't really find too much information on it.

If this is the case, should I be worried about over carbonating my beer if I only use Brett for bottling? Do I need to adjust the amount of priming sugar I use or is the amount of additional fermentable sugar negligible when it comes to CO2 production during bottling?

share|improve this question
    
Hmmm...Is the beer you are carbonating, was it fermented with 100% Brettanomyces? Or was it standard yeast, Saccharomyces cerevisiae? Adding Brett to a beer for priming, if the beer is already full of regular yeast, will not yield much in the end. You would have to sanitize the beer with a Campden tablet or something and then add the Brett. Honestly, I can't believe you would get much Brett flavor or character by just priming with it. –  TinCoyote May 24 '10 at 20:16
    
I was just thinking about using a normal yeast for fermentation and Brett for bottling (like the Orval Trappist ale). I would probably let my beer rest in the secondary for a month or so, then bottle with Brett for just a little Brett flavor. –  Room3 May 24 '10 at 20:40
1  
Well brett is so slow, that your primary fermentation strain will do most of the carbonating. As for the over carb threat, it might be a concern, but I don't know how much. –  brewchez May 25 '10 at 12:31

1 Answer 1

up vote 3 down vote accepted

I think your best bet would be to ferment with your primary yeast as planned. Transfer to secondary. Pitching in the brett to finish of what residual and non fermentables it can. This might take a few months.

Then I'd bottle as usual, maybe even adding a 1/4 packet of dried ale yeast to ensure you get carbonations.

That way if it is possible to get a little brett flavor by pitching brett late as you suggest, you'll ferment off the danger of bottle bombs.

If you try it out this way or another, I'd like to hear the results someday, so check back here and repost with a comment, or look up my profile and email me the results.

Cheers and good luck.

share|improve this answer
    
I plan on starting this one in about a month. I think I'll go with your suggestion, and hopefully I remember to come back here with the results. –  Room3 May 26 '10 at 16:35
    
I've used this method as well - Unless you've brewed a similar recipe and know what the FG will settle out at after Brett, you should go this route. I added carb tabs to mine, per normal instructions, and it came out perfectly carbonated and Brett-flavored. –  Brandon Dec 13 '10 at 18:02

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.