Take the 2-minute tour ×
Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. It's 100% free, no registration required.

Does using gelatin effect aromatics or flavor appreciably?

I was reading this post about using gelatin. I have one keg that I use as a cold conditioning vessel (sort of like secondary), and I was going to try experimenting with gelatin for a few beers to see if I liked the results.

Thoughts on the negative, if any, impact of gelatin.

share|improve this question
    
Have you tried it yet? Any results? Also, if you use gelatin and you have any vegetarian or vegan friends, it would be good of you to let them know your beer isn't vegetarian. –  JackSmith Jun 14 '10 at 20:52
    
I am still fermenting an american wheat and a belgian wit in my chest freezer which is also my kegorater. Once they are done I have a German hopped Amber in my "bright tank" keg that I will gelatinize after chilling. I'll let you know here when its done and ready. –  brewchez Jun 15 '10 at 12:10
    

3 Answers 3

up vote 4 down vote accepted

There are no real drawbacks that I know of.

It's odorless, translucent, and very nearly tasteless. I've used it as a fining agent in my secondary. It does the job a bit better than a cold crash does to drop fine particulates out of solution. You can make some nice clear beer with a gelatin fining.

The only time I've had any problem is when I didn't prepare the gelatin properly, per the instructions on the box. Then I got some gelatin chunks on the bottom of my fermenter. Not a big deal, but irritating.

share|improve this answer
    
so do you just bloom/proof one package in hot water or what? –  brewchez May 2 '10 at 15:15
    
Actually you bloom in cold water, then melt the gelatin in hot water. I use Knox, just follow the instructions on the package. As to worries about making beer jello, I wouldn't worry about it, its going to get very diluted in the five gallons of young beer. I used a half package, opinions on how much to use vary. I wouldn't use more than one package. –  TinCoyote May 3 '10 at 17:59

I usually use just whirlfloc tablets for fining, but I'm also very interested in trying gelatin as it is not consistently clear enough. I was going to try it on my most recent brew but it didn't work out and I went ahead and kegged it without trying the gelatin.

At any rate, I've read quite a few forum posts from people who say it works well, and very few that were unsatisfied with the results. The bit I read that really convinced me was on Brulosphy. I thought it was well written and it allayed my concerns about flavor and mouthfeel.

share|improve this answer

I ran across good advice on another site for using the gelatin when fining the beer. Presumably just before bottling, but I don't know. Still reading up on the subject.

share|improve this answer
    
Just a quickie update. Lots of good info on fining in this article, again - from another site. --> byo.com/stories/wizard/article/section/121-mr-wizard/… –  KO Jun 23 '10 at 16:58

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.