Take the 2-minute tour ×
Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. It's 100% free, no registration required.

So, I want to make a red beer, what is the best malt to get this color?

share|improve this question
1  
Hmmm...I think you are essentially asking the wrong question. You can't drink color. Making a beer to a specific color before making it to a specific flavor and strength is backwards. Color is a distant consideration behind flavor, strength, bitterness, mouthfeel, and head retention. –  TinCoyote Apr 4 '10 at 4:43
3  
I think it depends on how you interpret his question. If he really means he wants to make a red ale, then as far as I'm concerned that red color is tied to a particular flavor (at least for me), and that flavor would be the makings of the malty backbone of anything from say an all-malt Irish red to a heavily hopped imperial red. If he does actually mean he wants a red beer, regardless of the flavor/style, then that seems like an odd question, but my answer below will color his beer red anyway. –  WhatsBillDoing Apr 5 '10 at 11:58

4 Answers 4

up vote 6 down vote accepted

I've done two red ales so far.

In the first I used a combination of Weyermann Carared (http://www.northernbrewer.com/brewing/brewing-ingredients/grain-malts/caramel-malts/weyermann-carared.html) and Simpsons Dark Crystal (http://www.northernbrewer.com/brewing/brewing-ingredients/grain-malts/caramel-malts/simpsons-dark-crystal.html) about half a pound of each.

For the second I used a pound of crystal 20L and a pound of crystal 60L with pale malt extract. It turned out a very nice red.

share|improve this answer

Dark malts will give you that color. The problem is that you have to be very careful or you'll add too much roast/chocolate/bitter grain flavor. 1.5 - 3% of the grainbill to start out with; two or three ounces in a 5 gallon batch. Try pale chocolate or dehusked/debittered roast barley .

There's always food coloring too.

Trivia: All beer is red.

More information than you ever may want to know about beer color is in the 2009-11-16 episode of BrewStrong.

share|improve this answer
    
I understand the all beer is red concept from that show. But why then is making Red ale such a hard thing? From that episode, my take is that the perception of red and the scientific definition of red somewhat diverge. –  brewchez Apr 5 '10 at 12:27

One or two ounces of roasted barley is what I use to get that red color. My basic red ale has a crystal 60 and 120 in it as well. But its really the roasted barley in combo with those that gets you there.
EDIT: Here is a Red Ale recipe from Zymurgy magazine you can try. I don't know if you can get these ingredients or not however.

7lb Maris Otter Pale malt
3lb Munich 10L
0.5lb carared 20L
0.33lb Crystal 120L
0.25lb Roasted barley
1.25oz fuggles hops 45min
1.0oz EKG hops 15min

If all-grain isn't your thing; I suppose you could substitute ~5lb English LME for the Maris Otter and ~2lb of Munich LME for the munich.

share|improve this answer

I've used C90 for an ESB and the colour was a beautiful ruby. Also small amounts of Special B or C120.

share|improve this answer
    
I concur about the C120, and I'm sure the Special B works too. –  Graham May 29 '12 at 13:59

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.