Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

What are the effects of underpitching your beer?

We have an answer for over pitching, I think we need the complete set.

share|improve this question
up vote 3 down vote accepted

Yeast produce different flavors during the various stages of their lifecycle. Underpitching lengthens their "growth" phase (maybe a better name is "division" or "budding"). The bulk of a beer's esters are produced during this initial stage, so extending this part of the lifecycle increases this sometimes undesirable quality.

Yeast need oxygen to bud. A homebrewer can usually dissolve enough oxygen into wort to facilitate four buddings. Once out of oxygen yeast begin consuming sugars. In this phase the yeast stores energy to sustain it during hibernation. Yeast will begin consuming the simple sugars moving to the more complex molecules as the easy to digest food diminishes. Once it is full of stored energy the cell shuts down and flocculates.

Underpitching can introduce an insufficient amount of yeast to entirely consume the entirety of the beer's fermentables. Your fermentation may not finish, or there could be enough food for an infection to take hold.

Use Jamil's pitching rate calculator to avoid the problem.


Interview with Dave Logsdon (of WYeast) on April 5, 2007 BBR

share|improve this answer

I found out that I've been drastically underpitching my first few batches. I'm fairly ready to blame my under-attenuated beers on this. Here's why:

  • I started with a dry yeast pack (Danstar Nottingham Ale) back when I was just a kid and didn't know anything... read: December. I pitched direct into the wort and got 70% apparent attenuation. That batch had one problem though: the dreaded banana flavor, which didn't actually emerge until after bottle conditioning.

  • That led me to believe that it was the yeast that was the culprit for the banana flavor. I switched to Wyeast smack packs, all purchased from the LHBS, and believed the printing on the pack that it was good for pitching one five-gallon batch up to 1.050 OG. I think my pitch rates went down significantly because of this.

  • This led me to a series of under-attenuated beers. Strangely, I've had one beer that went over the attenuation range for its yeast (a maibock fermented with Cry Havoc). The fact that this came from a different supplier (White Labs) and was maybe fresher, made me think that under-pitching was a problem. Accordingly, I've edited my answer to the yeast re-use question to recommend more slurry and shorter storage.

  • For my next seven batches, I'm moving to a series-based approach, probably using a White Labs American Ale Blend to get a solid yeast cake on a cream ale, then re-using most of that slurry in three generations of two batches each, with the last two batch generation being two high-gravity beers pitched directly onto the yeast cake of the previous batch. (Is "pitched" the right word here? Spawning new question.)
share|improve this answer
Very nice progression on skills and understanding. Yes Pitch is the right word. – brewchez Mar 25 '10 at 20:31

More ester formation. This could be good in a Belgian beer where you want to accentuate the yeast-derived flavors, or bad such as in the case of lagers. Generally it's best to pitch the right amount of yeast and control ester production with fermentation temperature.

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.