Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I bottled my beer two days ago, primed with honey as per the instructions of my all-grain kit. I've since been reading and found you need to leave about an inch of headspace in the bottles. Unfortunately I did not know this at the time and have filled the bottles to the brim.

Is it ok to open the bottles and let some beer out to get this headspace or will that ruin the beer?

share|improve this question
up vote 2 down vote accepted

You can do that, but you will lose a bit of the CO2 that has been produced. Assuming you cap, you will have to recap with new (sanitized) caps.

If you work clean this should not give you any problems.

share|improve this answer
I opened a couple of the bottles and they seem very carbonated after only two days, lots of foam trying to get out so I screwed the lid shut again (using plastic PET bottles). Not really sure what to do now... :S – Sgt Beardy Jul 8 '14 at 21:11
if they are already very carbonated, move them to a fridge. Since you used PET bottles, you should not have any issues with bottle bombs, but they will continue to carbonate and upon opening will be like a champagne bottle and whatever beer you do manage to get into a glass will be flat (go figure). – Wyrmwood Jul 8 '14 at 23:24

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.