Sign up ×
Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. It's 100% free, no registration required.

I have been in the habit of leaving my beers in their primary fermenter for three weeks across the board, which is a significant amount of time longer than their primary fermentation usually takes. My rationale is that this gives the yeast time to start cleaning up any off flavours and by-products prior to me bottling the batch.

How long does this secondary process actually take? Given that I give the beer three weeks to carb and condition after bottling, is this time redundant?

share|improve this question

2 Answers 2

I buy extract kits complete with instructions. All of the kits I bought say ferment for 2 weeks then bottle. Then condition 2 weeks in the bottle. (one exception being a pumpkin spice ale that required 8 weeks in primary).

That being said, my blonde ales seem to like the 2 weeks just fine but the cream ale didnt really reach its prime until 3 weeks. This I know because I made 2 batches at the same time, but bottled them in 2 separate sessions a week apart because of time constraints. I needed to get a batch in the bottles for a party but didnt have time to bottle both batches that one particular day. the second batch came out WAY better. AND, the longer they were in the bottles the better they got.

share|improve this answer

Generally speaking, the amount of time for proper conditioning after completion of primary fermentation increases with the OG of the post-boil wort. It can also be dependent on beer style and personal taste.

A low gravity (1.040's) ale can be ready in 2 weeks. A high gravity russian imperial stout can sometimes take 6 months to develop the flavors desired and reduce undesirable fermentation by-products.

With hoppy beers like IPAs, care must be taken to not condition for too long or else the hop aroma will fade. It's always preferable to dry hop towards the end of the conditioning period.

Another factor to consider for conditioning time is off flavors and undesired fermentation by-products. One example is acetaldehyde due to rapid temperature fluctuations. This is something that will usually be cleaned up over time, meaning you will need to condition your beer longer than you would if your fermentation temperatures were consistent.

share|improve this answer
When you say 'rapid temperature fluctuations', how extreme do you mean? – BrianV Apr 9 '14 at 16:07
It's generally recommended that the temperature of actively fermenting wort not change more than a degree F or two per day. Anything faster than this could be "stressful" to the yeast and result in more off-flavors being produced. – Conman27 Apr 9 '14 at 17:15

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.