Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

We made the beer, it fermented fine, then waited to bottle (maybe too long afterwards) added sugar and bottled. After waiting for the required time opened a bottle only to find it flat. Can we add more yeast and still save this batch of beer or do we need to start over...? Can the original brew be salvaged?

share|improve this question

closed as unclear what you're asking by jsled Apr 30 '14 at 3:59

Please clarify your specific problem or add additional details to highlight exactly what you need. As it's currently written, it’s hard to tell exactly what you're asking. See the How to Ask page for help clarifying this question.If this question can be reworded to fit the rules in the help center, please edit the question.

how long did you wait before bottling? – mdma Mar 28 '14 at 10:50
possible duplicate: homebrew.stackexchange.com/questions/4673/beer-not-carbonating – mdma Mar 28 '14 at 10:51
How much priming sugar did you add/mix when bottling? – Scott Mar 28 '14 at 17:50
Where was your beer stored? It is the yeast that produce C02, and if they are frozen they won't be doin' much – Mutmatt Apr 11 '14 at 15:16

I don't think this question can be answered without more information:

  • what was the final gravity?
  • how much priming sugar did you add?
  • what was 'the required time'?

Probably the best advice is wait another week or two and then sample it again. I often find it can take several weeks after bottling for appropriate carbonation.

share|improve this answer

For best results, you should add priming sugar to a bottling bucket rather than to each bottle. Dissolve your sugar in hot water, then rack on top of it. Gently stir the beer for a few seconds to mix it. DO NOT AERATE.

A good rule of thumb for carbonating in bottles is to let them sit at 70-75F for 3 weeks.

share|improve this answer
Useful information, but doesn't answer the question as to whether the user's batch of beer can be saved. – BrianV Apr 10 '14 at 21:03
I disagree, for easy results add sugar to bottling bucket (I do it this way), for excellent priming results add sugar directly to each bottle (a lot of work). When adding sugar to bottling bucket, it may not mix properly with the entire batch making some bottles uncarbonated and some over carbonated, – David PGB Apr 15 '14 at 5:03
@DavidPGB - I keg and only bottle a few bombers for gifts, etc. and I find priming tablets to be really handy. – Preston Apr 15 '14 at 13:56

Not the answer you're looking for? Browse other questions tagged or ask your own question.