Take the 2-minute tour ×
Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. It's 100% free, no registration required.

I was hoping to put together an information system that could measure the temperature of the water in a bucket where I place my fermenting-bucket and notify my smart phone when I need to replace the frozen water bottles.

I have an old Android phone. I know Java and can learn to program Android relatively easily.

What I am missing is the networked thermometer that can measure liquids.

The iGrill could potentially work; however, in the FAQ section it states that it cannot measure liquids. A potential work around would simply be to encase the temperature probe in a water proof enclosure and submerge it in the water of the swamp cooler, but I would rather work with something that could measure the water directly.

Does anyone know of such technology?

share|improve this question
add comment

4 Answers 4

You may want to check out brewpi - it's a fermentation monitor, but isn't limited to just fermentation. The temperature devices used are DS18B20 temperature probes. You can get these pre-made in waterproof housing from sellers on ebay - the project also has a shop that sells them. The manufacturers claim they are accurate to +/- 0.5 C, although my tests against a calibrated thermometer show in practice they are accurate to +/- 0.1C.

enter image description here

Although the BrewPi project mainly touts the raspberry pi as the main wireless device, you can collect the results over any serial interface, such as a spare PC, or a linux-capable router.

The project logs data into pretty graphs so you can see the temperature now, or review later for any unexpected swings. I know the code well - it would be possible to alter the code to send a message when the temperature rises above a pre-set value. You'd then code a java app on your android phone to handle this message.

EDIT: I didn't mention, these probes are digital - they communicate temperature using a digital protocol called OneWire. The advantage is that you can connect multiple sensors to the same 3 power/data lines, and they produce much less noise over long cables compared to analog sensors like the LM37. The disadvantage is that you need to implement the OneWire protocol - e.g. use a OneWire library. This is the approach taken with the Arduino in brewpi, which has a ready available OneWire library.

If you are using a fan, the brewpi can control the fan to increase the rate of cooling when necessary. The controller uses a predictive algorithm, which avoids overshooting, and is much more accurate compared to a simple on/off thermostat algorithm.

share|improve this answer
    
Interesting. When looking at their site, it would appear they may be sending out the full package pre-assembled at some point. Any ideas on a price for the full kit pre-assembled? –  Scott Jun 5 '13 at 21:58
    
I happen to have a RPi that I haven't used yet. I'll check this out; thanks MDMA. –  Matthew Moisen Jun 5 '13 at 22:52
    
When searching Amazon or eBay for DS12B20 temperature probes, the only results I get back are for DS18B20 probes. Is this what you meant, or does it not make a difference? –  Matthew Moisen Jun 5 '13 at 23:02
    
It was a typo - DS18B20 is the correct one. –  mdma Jun 5 '13 at 23:13
    
@Scott - The RevA shield sold for 27.50 euro + 5 euro for soldering. I don't know how much the new one will cost. For monitoring just one temp sensor, you could just plug that directly into the Arduino and do away with all of the other parts (shield, SSRs, LCD display etc), they're not needed. –  mdma Jun 5 '13 at 23:18
add comment

I'm actually in the exact same boat. Well.. Similar. Wasn't going to bother with the smartphone, but will have some form of communication. Here's what I have in mind

I just ordered a USB Thermometer off Amazon that people have managed to get working in linux (specifically Ubuntu, but it sounds like it is agnostic to distros). From here I could whip up a real simple web app that communicates with a database I house locally (either MySQL or MongoDB, depending on whether I go a LAMP stack or with Node + Express). From there, take periodic recordings of the swamp cooler, and push out some form of communication. I'd like to get it working on Raspberry Pi, which while my knowledge of it is limited, I've heard that some people have used Google Talk with it for notifications, in which case that's handled. Just something to chew on. I'm excited for the delivery so I can get cracking.

Edit: The same crazy dude in the second link above is also a homebrewer (same reason for using the thermometer), and even went as far as to use a USB microphone to measure the airlock's bubbling to determine the length of fermentation.

share|improve this answer
    
Hey Scott, do you already have a RPi or do you need to order one? If you would be willing to blog about it I would definitely be interested. I have a RPi but, unfortunately, have limited linux exposure. What do you think about MDMA's suggestion of either plugging the probes into the RPi and coding it ourselves, or just purchasing the BrewPi? The only thing I am concerned with about the BrewPi is that the guy running it has had manufacturing setbacks. –  Matthew Moisen Jun 5 '13 at 22:56
    
The setbacks only caused delays, not any quality issues with the final product. As well as a RPi, you'll need an Arduino, such as an Arduino Uno. You can't easily plug the probes into the RPi, unless you get a OneWire USB adapter. You don't need the brewpi shield or any of the other parts to monitor a single temp sensor - just plug the temp sensor directly into the arduino. –  mdma Jun 5 '13 at 23:15
    
@Matthew, I do not yet own a Raspberry Pi. What I was planning on doing first with this (also purchased a USB scale) is to first make sure I can get them working in linux. If I can do that, then I'll develop web applications to get them running across a network. As long as I can do that on one of the spare linux boxes I own, it will run on Raspberry Pi no problem (at least that's what I tell myself). In the interim, if you want to look into the BrewPi, it could very well be worth it (it peaked my interest). Besides, the USB thermometer I order was a measly $11+ postage if it fails. –  Scott Jun 5 '13 at 23:31
    
In the event that I do get it working, I most certainly will share all documentation on it, distribute via github, and be willing to provide assistance where possible. Technology + Homebrewing = Better Beer, which I'm all for! –  Scott Jun 5 '13 at 23:32
add comment

If you are into brewing (daa) and want to get your hands dirty(er) (into programming and electronics) you migth check "the electric imp" a relative simple and small datalogging device.

Is that small

It's well documented, user friendly, web avaliable and It also connects to your home wifi

Here is a full instructable implementing a temperature web sensor.

Total cost: arround 50$ plus shippings

Hope you find this usefull!

PS: I'm sure you could replace the NTC thermistor with other sensor

share|improve this answer
add comment

Here is a pure RaspberryPi + DS18B20 solution (no Arduino required) and tutorial by Adafruit requiring the following:

RPi

DS18B20

Bread Board

"Pi Cobbler" (purchased from Adafruit)

Male Jumper wires

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.